1-800-479-3857
3509 Route 22, Somerville, NJ 08876
28 Brandywine Drive, Deer Park, NY 11729

Skip Navigation LinksGSEE Home > Elliott HiReach

Contact: Bill DiCola (610) 328-4453

Elliott HiReach

Lifetime Structural Warranty


Elliott L60R

New Elliott Hi-Reach L60R

IN STOCK - READY FOR DELIVERY

* CDL BEATER *

*******************

ALL NEW EZR WORK PLATFORM WITH ALUMINUM FLOOR, PERMANENTLY MOUNTED PLATFORM JIB WINCH, AND UPPER CONTROL BOX.

*******************

62' working height. Basic unit includes base assembly supporting rear mounted rotating turret, hydraulically powered continuous rotation mechanism, oil reservoir mounted to truck frame, oil, and manual hydraulic controls mounted to turret. Electronic proportional three stick remote controls on platform. Base mounted "MH" type hydraulically powered, individually controlled rear main outriggers and “A” secondary outriggers behind cab. Steel three section hydraulically telescoping boom with one double acting 6" lift cylinder plus a 3" piggyback extension cylinder. Exposed cable carrier to boom tip. Electronic self-leveling and rotating 40" x 60" EZR work platform with remote leveling from platform and aluminum floor. Power take off and pump drive, pressure gauge, pump and holding valves on all cylinders. Remote start/stop at upper and lower controls, 12-volt emergency pump with switch at upper and lower controls, PTO hour meter, backup alarm, fire extinguisher, safety triangle kit, and two body harness and lanyard. LED lights to include all bed marker lights, stop, tail and turn. Installed on chassis, tested, checked and ready to operate. Unit certified to ANSI A92.2 for Vehicle-Mounted Elevating and Rotating Aerial Devices. Platform capacity 500 lbs.

Installed on chassis, tested, checked and ready to operate.

Unit certified to ANSI A92.2 for Vehicle-Mounted Elevating and Rotating Aerial Devices. Platform capacity is 500lbs.

  • 14' Steel floor bed with Grip Deck Coating (For use with Cross-body Box)
  • Standard ICC Rear Bumper with Steps and Grab Handles
  • 5,900 lbs. Planetary Winch w/anti-two-Block switch, Horn, Two part hook & 130' 3/8" cable with retainer lug
  • 500 lb Platform Mounted Jib with Hydraulic Winch drum mounted in Platform Floor
  • 110 volt line to platform
  • (2) Sign forks on platform
  • Hot Shift PTO for Automatic Transmission
  • 98" x 36" x 24" Steel Cross Body Box (Requires 2" Shorter Bed)
  • Steel Cable Carrier Cover
  • Cab Windshield Guard and Platform Walkway
  • Mounting Bracket Above 8' Crossbody Box for (Customer Installed Welder / Generator)(Designed for Miller Bobcat 225NT)
  • Remote Start. Kill Switch in Platform for (Customer Installed Welder / Generator)
  • Welder leads to platform - (2) 1 Gauge Cables
  • HiReach Unit Painted Red, Sub-frame Painted Black, Outriggers Painted rec (STD)

2017 Freightliner M2 106

240 hp Cummins ISB diesel engine, 187" WB, 100" AF, Allison 2500RDS automatic transmission, 25,999 GWVR, 11R22.5 front and rear tires, hydraulic brakes, 50 gallon alum fuel tank, AM/FM stereo radio, cruise control, air conditioning, Non-susp driver sear, two man Bench seat. Wheels, Color White


Elliott V60F

New Elliott Hi-Reach V60F

IN STOCK

63’ working height. Basic unit includes base assembly supporting front mounted rotating turret, hydraulically powered continuous rotation mechanism, oil reservoir mounted to truck frame with oil. Selector switches mounted at turret. Electronic proportional controls on platform. "A" style hydraulically powered, individually controlled front main outriggers and "A" style secondary outriggers. Steel three section hydraulically telescoping boom. Hydraulically self-leveling and rotating 30" x 40" work platform with integral tool tray. Leveling from platform. Lifting eye in boom tip rated at 500 lbs. PTO or punp clutch drive, pressure gauge, pump, and holding valves on all cylinders. Remote start/stop at upper and lower controls. 12 volt emergency pump with switch at upper and lower controls, backup alarm, fire extinguisher and two body harness and lanyard. Safety triangle kit. Installed on chassis, tested, checked and ready to operate. Unit certified to ANSI A92.2 for Vehicle-Mounted Elevating and Rotating Aerial Devices. Platform capacity is 500lbs.

  • 15’6” Low Profile Steel floor bed with Grip Deck Coating.
  • Standard ICC Rear Bumper.
  • 500 lb Platform Mounted Jib with Hydraulic Winch mounted under Platform.
  • 110 volt line to platform
  • (2) Sign forks on platform
  • Hot Shift PTO for Automatic Transmission
  • Chassis rating – 19,500 lb. GVWR. Non CDL
  • HiReach Unit Painted White, Sub-frame Painted Black, Outriggers Painted Red (STD)

2016 Dodge 5500 4x2

305 hp Cummins 6.7L Turbo Diesel Engine, 50 state emissions, 192” WB, 108” CA, 6-speed automatic transmission Aisin AS69RC HD, 19,500 GVWR, 7,000 lb front axle, 13,500 lb rear axle, P225/70R19.5F front and rear tires, 4.88 axle ratio, anti spin rear axle, PTO prep, 52 gallon rear fuel tank, bright bumper/ grille, engine block heater, cruise, air conditioning, AM/FM w/CD, 40/20/40 vinyl split bench seat, power windows & locks, heated mirrors. Color: White. FOB Omaha, NE


Elliott Equipment's aerial workplatform and crane features a vertically telescoping turret which allows for up-and-down access with no potential dangerous tail swing.

An oversize work platform which can handle two workers and materials. The size of the platform allows the entire job to be done in the air, without returning to the truck to raise or lower materials or tools. This shortens job time and increases machine life due to reducing the cycles of machine operation.

Product Brochures: L60R  G85R  L55R  Elliott Boom Truck V60F 
  • 36'-140' work heights
  • Electronic proportional 3 stick remote controls on platform
  • Base mounted hydraulically powered main outriggers
  • Hydraulically powered "A" type secondary outrigger for full stabilization
  • Rectangular steel 3 section hydraulically telescoping boom with one double acting lift cylinder
  • Hydraulically self-leveling 40x60” EZR basket with remote leveling from platform
  • Power take-off
  • Remote start/shutdown at upper and lower controls
  • 110 volt line to platform
  • Cab windshield guard (from back of cab to front of windshield) 5,900 lb. hydraulic planetary winch w/anti-two-block switch, 3/8” cable and hook storage bracket
  • Platform mounted jib with hydraulic winch with 500 lb. capacity. Load line to be 12” minimum from platform rail with jib arm in uppermost position (requires 40x60” end mounted platform)
  • "MH" type outriggers for better stabilization
  • Hydraulically powered continuous rotation
  • Individually controlled main and secondary outriggers
Elliott HiReach Elliott HiReach
Elliott hi-reach boom and bucket trucks Elliott hi-reach boom and bucket trucks Elliott hi-reach boom and bucket trucks

Sign and Lighting Page 1
Sign and Lighting Page 2

Elliott Equipment Company   Elliott Equipment Company